TWSocketServer

Main page -> ICS component reference -> TWSocketServer and TSslWSocketServer

Overview

unit		OverbyteIcsWSocketS.pas
inheritance		TWSocket

TWSocketServer will normally be used to listen on a given TCP port. When a client connects, it will instantiate a new TWSocketClient component to handle communication with client. Normally you will derive your own component from TWSocketClient to add private data and methods to handle your processing needs. You tell TWSocketServer which component class it has to instantiate using ClientClass property. You have to initialize each instance created to handle each client from OnClientConnect event handler. TWSocketServer maintain a list of connected clients. You can access it using Client[] indexed property. ClientCount property is the size of Client[] array.

Since it is derived from TWSocket and TSslWSocket, lots of properties and events are unused and not listed here. Properties and events that have a meaning in both server or client component are listed here.

Note that TWSocketServer is only usable for incoming TCP connections. Use TWSocket if you need to use UDP.

Note: When a TWSocketClient is closed, it automatically frees itself. With a normal TWSocket, the programmer is responsible for freeing the object.

Properties

Addr		Server listen IP address, IPv4 or IPv6, maybe 0.0.0.0 or :: to listen on all available addresses, ignored if any IcsHosts specified. IP address must exist and not be in use elsewhere for the same port.
Banner		A short message line sent when each client connects. Should generally be blank.
BannerTooBusy		A short message sent when a client connects and the number of clients already exceeds the MaxClients limit.
CertExpireDays		When using IcsHosts, the number of days before an SSL server certificate is due to expire that warnings will be generated (by the method RecheckSslCerts, perhaps triggering automatic SSL certificate ordering.
Client		Currently active clients of ClientClass, indexed base zero. Note the index value may change each time a new client connects or disconnects, so check CliId to confirm it's the correct one.
ClientClass		The class type the application has derived from TSslWSocketClient for client application code.
ClientCount		Number of connected clients.
DHParams		Specifies a DHParams file name, created using the PenTools sample, or use the provided dhparam1024.pem or dhparam2048.pem files. Used for DH and DHE ciphers, but not needed for modern ECDHE ciphers. Rather than a file name, may be an ASCII PEM string containing the DHParams without any line endings.
Handle		Handle of the hidden window used for socket operation.
HSocket		Underlying winsock socket handle.
IcsHosts		Allows one or more TIcsHosts to be set, as TIcsHostCollection, an alternate way for specifying multiple listeners that allows multiple hosts to be specified, each with one or two IP addresses and non-SSL and SSL port bindings, SSL certificates and private key (perhaps combined in a bundle), SSL context and security level, and other web server host related properties (used by higher level components). Each IcsHost has one or more HostNames to which it will recognise, that can share IP addresses.
LastError		Last error which occurred.
ListenBacklog		How many new client connections should be queued by Windows while the server accepts them, before the server starts rejecting new connections by immediately closing them. Recommended as 15 for heavy use servers, may be up to 250.
MaxClients		Maximum number of simultaneous clients the server should accept if non-zero. Any further clients will receive then BannerTooBusy response and the connection closed, until earlier connections are closed.
MultiListenSockets		Allows one or more extra server listen IP addresses and ports to be specified, as type TWSocketMultiListenCollection, allowing server to listen on several IP addresses/ports at the same time, in addition to the that specified as Addr/Port props. Each TWSocketMultiListenItem has Addr, Port, SocketFamily, SslEnable and ListenBacklog properties. Better to use IcsHosts for new applications which does the same, ignored if any IcsHosts specified.
MultiListenIndex		Read only, which listen socket accepted last connection, -1 if default Addr.Poprt used, 0 or above is index into MultiListenSockets collection.
Port		TCP port or service name to listen to, usually 80 or 443, ignored if any IcsHosts specified.
PortNum		Readonly property with numeric value corresponding to Port.
Proto		Protocol used. Must be 'tcp'.
RootCA		Specifying a file name containing a PEM bundle of trusted root SSL certificates allows validation of SSL server certificate chains. ICS includes RootCaCertsBundle.pem (large) and TrustedCABundle.pem (medium size), and a default built-in (small) that will be used if no file is specified.
SocketErrs		How socket error messages should be presented as type TSocketErrs, wsErrTech or wsErrFriendly.
SocketFamily		IP address socket family as TSocketFamily, from sfIPv4, sfIPv6.
SslCertAutoOrder		True if IcsHosts are allowed to order and install SSL certificates automatically. Requires SslX509Certs property to be set, and CertSupplierProto set for any IcsHost that will order certificates.
SslEnable		True if an SSL connection should be negotiated. ignored if any IcsHosts specified.
SslCliCertMethod		Allows server to request a client SSL certificate from the browser or remote application, as type TSslCliCertMethod, with sslCliCertNone, sslCliCertOptional or sslCliCertRequire. Require will close the connection unless a valid certificate is received and validated against RootCA. Beware requesting a client certificate usually causes the browser to prompt the user for which certificate to send which can be obtrusive.
SslContext		Assign to an TSslContext component for SSL support, where SSL certificates, keys, protocols and ciphers are specified, ignored if any IcsHosts specified.
SslX509Certs		Assign to a TSslX509Certs component if automatic SSL certificate ordering is required. Ir ia very important that the onCertProg is used to log progress messages from the certificate ordering process in case of errors. The onCertsChallengeDNS event is called if a DNS server should be updated, onCertsOAuthAuthUrl if 0Auth2 authenication is needed, and onCertsNewCert when a new certificate is available which should be logged and the RecheckSslCerts method called to cause the server to load it.	State		Gives the state of the component.

Methods

Abort		Abort current asynchronous operation.
Close		Stops listening, does not disconnect connected clients.
CloseDelayed		Same as Close however it's executed delayed, after current event has finished.
Create		Create a new instance of the component.
Destroy		Destroy the current instance.
IsClient		Check if a component reference is one of the connected clients.
Listen		Start accepting connections.
MessageLoop		Internal message loop.
MessagePump		Internal message pump.
ProcessMessage		Process a single message.
ProcessMessages		Process messages until message queue is empty.
Release		Destroy the current instance after the current event is terminated.
ThreadAttach		Detach from current thread.
ThreadDetach		Attach to current thread.

Events

OnBgException		When a background exception occurs.
OnChangeState		When the component state changes.
OnClientConnect		When a new client is connecting.
OnClientCreate		When a new client component instance is created.
OnClientDisconnect		When a client disconnects.
OnError		When an error occurs. Better to use exception handling.
OnMessagePump		To call your own external message pump instead of built-in one.

TWSocketClient

Each new incoming connection to TSslWSocketServer causes a new instance of TSslWSocketClient to be created, with a number of read only properties set, that may be useful for client application code. Generally, applications will create their own class descended from TSslWSocketClient which is where all the code to listen to requests and send responses will go.

Server		TCustomWSocketServer component to which the client belongs.
PeerAddr		Remote IP address of the client, IPv4 or IPv6.
PeerPort		Remote IP port of the client.
[[TWSocketServer.Client.SessionClosedFlag | SessionClosedFlag - True if the client is in the process of closing.
CliId		A sequential client ID number that may be used to identify the client, note clients are creating and destroyed regularly.
IcsHostIdx		If 0 or higher index into the IcsHosts collection, -1 if IcsHosts not used.
MultiListenIdx		-1 if default SocketServer listener used, 0 or above is index into MultiListenSockets collection.
HostTag		A short alphabetic name for the IcsHost, used variously in high level servers.
CServerAddr		Local server IP address for listener.
CServerPort		Local server IP port for listener. How to Stop accepting connections ICS Components Reference